9H Automotive Ceramic Nano Coating

Material: Silicon dioxide

Drying time: 3min

Net content: 30ml

Using a 9H ceramic coating to protect and enhance the finish of your vehicle requires careful preparation and application. Here are step-by-step instructions on how to use a 9H ceramic coating:

Materials Needed:

• 9H ceramic coating kit (including ceramic coating, applicator pads, microfiber towels, gloves)
• Isopropyl alcohol (IPA)
• Automotive clay bar (if needed)
• Car wash soap
• Water bucket and hose
• Grit guards (optional)
• Foam applicator block (optional)
• Polishing compound (optional)
• Polishing machine (optional)

Step 1: Prepare Your Vehicle

1.1. Wash Your Vehicle: Start by thoroughly washing your vehicle using car wash soap and water. Ensure that all dirt, dust, and contaminants are removed from the surface.

1.2. Decontaminate the Surface: If your vehicle’s paint feels rough or has embedded contaminants, consider using an automotive clay bar to clay the surface. This step will create a smooth surface for the ceramic coating to adhere to.

Step 2: Perform Paint Correction (Optional)

2.1. Inspect for Imperfections: Examine your vehicle’s paint for imperfections like swirl marks, scratches, or oxidation. If needed, you can perform paint correction to address these issues. This step is optional but recommended for the best results.

2.2. Apply Polishing Compound: Apply a suitable automotive polishing compound to a foam applicator block or polishing machine, and work on one panel at a time. Follow the product’s instructions for best results.

2.3. Buff and Polish: Buff the compound in a circular motion until the imperfections are minimized or removed. Then, polish the surface to a high gloss finish.

Step 3: Prepare the Surface

3.1. Wipe Down with IPA: Using isopropyl alcohol (IPA) and a clean microfiber cloth, wipe down the entire surface you plan to coat. This step removes any remaining residues, oils, or contaminants that could interfere with the ceramic coating’s bonding.

3.2. Use Grit Guards (Optional): When rinsing and washing your vehicle, using grit guards in your wash bucket can help prevent new contaminants from scratching your paint.

Step 4: Application of Ceramic Coating

4.1. Choose a Controlled Environment: Apply the ceramic coating in a clean, dry, and shaded area. Avoid direct sunlight or windy conditions.

4.2. Put on Gloves: Wear the provided gloves to prevent skin contact with the ceramic coating, which can be harmful.

4.3. Apply the Coating: Dispense a small amount of the ceramic coating onto the applicator pad included in the kit. Use the pad to evenly spread the coating onto a small section of your vehicle’s surface (e.g., a hood or fender).

4.4. Work in Small Sections: To ensure proper coverage, work in small sections at a time. Use overlapping, cross-hatch patterns to evenly apply the coating.

4.5. Allow to Haze: After applying the coating, allow it to haze or flash for the recommended time specified in the product’s instructions. This typically takes a few minutes.

Step 5: Buff and Wipe

5.1. Buff with Microfiber Towel: Using a clean and dry microfiber towel, gently buff the coated section to a high gloss shine. Be sure to remove all haze and residue.

5.2. Repeat for All Sections: Repeat the application and buffing process for each section of your vehicle until the entire surface is coated.

Step 6: Curing Period

6.1. Follow Curing Time: Allow the ceramic coating to cure for the recommended time specified in the product’s instructions. This curing period typically ranges from 12 to 24 hours, but it may vary depending on the brand.

6.2. Avoid Exposure to Water: During the curing period, avoid exposing your vehicle to rain, water, or any other moisture.

Step 7: Final Inspection and Maintenance

7.1. Inspect Your Work: After the curing period, inspect your vehicle’s surface for any spots or areas that may need touch-up. Apply the coating to any missed or uneven sections.

7.2. Regular Maintenance: To maintain the coating’s protective properties, wash your vehicle using a pH-neutral car wash soap and use a microfiber wash mitt. Avoid using abrasive or acidic cleaners.

7.3. Reapplication: Depending on the product and usage, ceramic coatings may need to be reapplied every 1-3 years. Refer to the specific product’s guidelines for reapplication instructions.

By following these steps carefully and adhering to the manufacturer’s instructions on your specific ceramic coating product, you can protect your vehicle’s paint, enhance its appearance, and enjoy the benefits of long-lasting durability and hydrophobic properties.