Interior Plastic Maintenance Agent Coating

Using an Interior Plastic Maintenance Agent Coating is an effective way to revitalize and protect the interior plastic surfaces of your vehicle, including the dashboard, door panels, and trim. This coating helps restore their appearance and provides a protective layer against UV rays and wear. Here are step-by-step instructions on how to use an Interior Plastic Maintenance Agent Coating:

Materials Needed:

• Interior Plastic Maintenance Agent Coating
• Clean microfiber towels
• Interior plastic cleaner (optional)
• Clean water
• Soft brush or detailing brush (optional)
• Isopropyl alcohol (IPA) (optional)

Step 1: Prepare Your Vehicle Interior

1.1. Remove Loose Debris: Start by removing any loose dirt, dust, or debris from the interior plastic surfaces. You can use a soft brush or detailing brush to help dislodge and remove particles from crevices and seams.

1.2. Clean the Surfaces (Optional): If the interior plastic surfaces are heavily soiled or have stubborn stains, consider using an interior plastic cleaner. Follow the cleaner’s instructions to clean the surfaces thoroughly and remove any contaminants. Rinse and dry the cleaned areas.

1.3. Dry the Surfaces: Ensure that the interior plastic surfaces are completely dry before applying the coating.

Step 2: Application of Interior Plastic Maintenance Agent Coating

2.1. Shake the Product: Shake the Interior Plastic Maintenance Agent Coating bottle to ensure it’s well-mixed.

2.2. Choose a Controlled Environment: Apply the coating in a well-ventilated area, preferably indoors, to avoid dust and debris during application. Make sure your vehicle’s interior is not exposed to direct sunlight.

2.3. Prepare a Clean Microfiber Towel: Fold a clean microfiber towel into a manageable size for application.

2.4. Apply the Coating: Dispense a small amount of the Interior Plastic Maintenance Agent Coating onto the folded microfiber towel.

2.5. Spread Evenly: Gently apply the coating to the interior plastic surfaces using the microfiber towel. Work in small sections, ensuring even coverage. Apply the coating using a back-and-forth or circular motion to ensure complete coverage.

2.6. Avoid Overapplication: Be cautious not to overapply the coating, as a thin, even layer is sufficient for protection.

2.7. Allow to Dry: Let the coating dry for the time specified in the product’s instructions. Drying times may vary, but it typically takes a few minutes.